Check wire frame of seat bench and correct any deformations. |
Note The seat padding may differ from the one illustrated. Dimension -a- must be measured between the top of the seat padding and the top edge of the wire frame, irrelevant of the form of the seat padding. |
–
| Set down seat bench with seat cover on a clean, solid surface. |
–
| Check dimension -a- on both sides of seat bench frame (from padding to top edge of wire frame). Dimension -a- must be between 22 and 28 mm. |
–
| If dimension -a- is not as specified, wire frame must be corrected accordingly. To do so, press wire frame evenly into shape in area of -arrows-. |
|
|
|