Replacing air conditioner compressor pulley |
Note t
| At the start of production, vehicles with a 4 and 6-cyl. engine are fitted exclusively with air conditioner compressors manufactured by „Denso“ of type „6 SEU 14“. Depending on the engine and production period, air conditioner compressors from other manufacturers or a different version may be installed at a later date → Electronic parts catalogue. |
t
| On vehicles with a 4-cyl. engine and a 6-cyl. TDI engine, the air conditioner compressor can be detached from the holder and re-attached without opening up the refrigerant lines → Chapter. |
t
| On vehicles with a 6-cyl. petrol engine, the air conditioner compressor can only be detached from the holder and removed after opening up the refrigerant circuit → Chapter. |
t
| On vehicles with a 8-cyl. FSI engine, the air conditioner compressor is operated by way of a drive shaft which can only be detached and replaced after removing the air conditioner compressor → Chapter. |
t
| Detaching pulley from air conditioner compressor/re-attaching → Chapter. |
|
|
|