A4 Mk3
| Exploded view - tunnel cross member, gearbox mounting and gearbox support |
| 1 - | Nut |
| q | Only remove if gearbox mounting has to be detached from gearbox support |
| q | 20 Nm |
| 2 - | Bolt |
| q | 70 Nm |
| 3 - | Bolt |
| q | 40 Nm |
| 4 - | Nut |
| q | 20 Nm |
| 5 - | Gearbox support |
| q | → Chapter „Removing and installing gearbox support with gearbox mounting“ |
| 6 - | Gearbox mounting |
| q | → Chapter „Removing and installing gearbox mounting“ |
| 7 - | Stop (bottom) |
| q | For gearbox mounting |
| 8 - | Bolt |
| q | Only remove if gearbox mounting has to be detached from gearbox support |
| q | Renew |
| q | 20 Nm and then turn 90° further |
| 9 - | Tunnel cross member |
| q | → Chapter „Removing and installing tunnel cross member“ |
