audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking oil pressure switchF1 > < Removing and installing engine oil cooler

A4 Mk3

Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
Special tools and workshop equipment required
   
t  Articulated wrench, 24 mm -T40175-
  W00-10633
Removing
–  Remove air cleaner housing → Rep. gr.23.
  A23-10243
–  Remove bolts -2- and -3- and detach engine lifting eye -1-.
–  Unplug electrical connector -arrow-.
–  Use articulated wrench, 24 mm -T40175- to unscrew oil pressure switch -F1-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Cylinder head - exploded view“
–  Install coolant pipe (rear right) → Chapter.
–  Install air cleaner housing → Rep. gr.23.
–  Check oil level → Booklet811 or → Booklet812.
  A17-10639

Checking oil pressure switchF1 > < Removing and installing engine oil cooler