A4 Mk3
Radiator and radiator fans - exploded view |
1 - | Radiator fan control unit -J293- |
q | Supplied as separate unit or in combination with radiator fan -V7- (depending on equipment version) |
q | Removing and installing radiator fan control unit -J293- (separate unit) → Chapter |
2 - | Bolt |
q | 4.5 Nm |
3 - | Bolt |
q | 5 Nm |
4 - | Radiator cowl |
q | Removing and installing: on A4, together with radiator → Chapter, A5 → Chapter |
5 - | Radiator fan -V7- |
q | Supplied as separate unit or as part of radiator fan control unit -J293- (depending on equipment version) |
q | Removing and installing radiator fan -V7- → Chapter |
6 - | Bolt |
q | 3.5 Nm |
7 - | Washer |
8 - | Rubber bush |
q | For radiator |
9 - | Coolant hose |
q | Lift retaining clip to detach |
q | Connecting to radiator → Fig. |
10 - | O-ring |
q | Renew |
11 - | O-ring |
q | Renew |
12 - | Coolant hose |
q | Lift retaining clip to detach |
q | Connecting to radiator → Fig. |
13 - | Coolant hose |
q | To coolant expansion tank |
14 - | O-ring |
q | Renew |
15 - | Radiator |
q | Removing and installing: on A4, together with radiator cowl → Chapter, A5 → Chapter |
q | If renewed, change coolant in entire system |
16 - | Retaining pin |
q | Use screwdriver to release and pull off |
17 - | Rubber buffer |
18 - | Radiator bracket |
19 - | Bolt |
+ |
20 - | O-ring |
q | Renew |
21 - | Coolant hose |
q | Lift retaining clip to detach |
q | Connecting to radiator → Fig. |
22 - | Radiator fan 2 -V177- |
q | Not fitted if fan runs with 400 W |
q | Supplied as separate unit or as part of radiator fan control unit (depending on equipment version) |
q | Removing and installing → Chapter |
23 - | Bolt |
q | 5 Nm |