–
| Press guide rail of chain tensioner for drive chain in direction of -arrow- and lock chain tensioner by inserting locking pin -T40071-. |
Caution If a used drive chain rotates in the opposite direction when it is refitted, this can cause breakage. |
Mark running direction of drive chain with paint for re-installation. Do not mark drive chain by means of centre punch, notch or the like. |
|
–
| Unscrew bolts -1- and remove guide rail. |
–
| Remove bolts -2- and take off chain tensioner. |
–
| Detach drive chain for valve gear. |
Installation is carried out in the reverse order; note the following: |
Note Renew the bolts tightened with specified tightening angle. |
–
| Position drive chain for valve gear onto drive chain sprockets (according to marks applied when removing). |
|
|
|