audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil pressure switch for reduced oil pressure F378 > < Checking oil pressure switch F22 / oil pressure switch for reduced oil pressure F378

A4 Mk3

Removing and installing oil pressure switchF22
Removing and installing oil pressure switch -F22-
   
Removing
–  Pull off rear engine cover panel -top arrows-.
  Note
  A10-10940
Place a cloth beneath the oil filter housing to catch escaping oil.
–  Unplug electrical connector -arrow-.
–  Unscrew oil pressure switch -F22-.
Installing
l  Tightening torque → Chapter.
Installation is carried out in the reverse order; note the following:
  Note
t  Renew the seal.
t  Fit the new oil pressure switch -F22- into the connection immediately to avoid loss of oil.
–  Check engine oil level → Booklet811, → Booklet812 or → Booklet818.
  A17-10038

Removing and installing oil pressure switch for reduced oil pressure F378 > < Checking oil pressure switch F22 / oil pressure switch for reduced oil pressure F378