Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing catalytic converter (right-side) - vehicles with manual gearbox/multitronic gearbox 0AW >
< Removing and installing catalytic converter (left-side) - vehicles with manual gearbox
A4 Mk3
Power unit
6-cylinder direct petrol injection engine (3.2 ltr. 4-valve), mechanics
Exhaust system / Silencers
Removing and installing catalytic converter (left-side) - vehicles with multitronic gearbox 0AW/automatic gearbox 0B6
Removing and installing catalytic converter (left-side) - vehicles with multitronic gearbox 0AW/automatic gearbox 0B6
Removing and installing catalytic converter (left-side) - vehicles with multitronic gearbox 0AW/automatic gearbox 0B6
Removing
l
Gearbox removed.
–
Remove electrical connector
-1-
for Lambda probe 2 after catalytic converter -G131- from bracket and unplug connector.
Note
Disregard items marked
-2, 3, 4-
and
-arrows-
.
–
Unscrew nuts
-arrows-
and detach catalytic converter (left-side).
Note
t
For illustration purposes, the installation position is shown with the engine removed.
t
Disregard
-item 1-
.
Installing
l
Tightening torque
→ Chapter
.
Installation is carried out in the reverse order; note the following:
Note
Renew gaskets and self-locking nuts.
Power unit
6-cylinder direct petrol injection engine (3.2 ltr. 4-valve), mechanics
Exhaust system / Silencers
Removing and installing catalytic converter (left-side) - vehicles with multitronic gearbox 0AW/automatic gearbox 0B6
Removing and installing catalytic converter (right-side) - vehicles with manual gearbox/multitronic gearbox 0AW >
< Removing and installing catalytic converter (left-side) - vehicles with manual gearbox