audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Oil retention valves, oil separator > < Removing and installing valve for oil pressure controlN428

A4 Mk3

Checking oil pressure
Checking oil pressure
Special tools and workshop equipment required
   
t  Oil pressure tester -V.A.G 1342-
Procedure
l  Oil level OK
l  Engine oil temperature approx. 80 °C.
–  Remove oil pressure switch -F22- → Chapter.
–  Connect oil pressure tester -V.A.G 1342- to bore for oil pressure switch.
–  Screw oil pressure switch -F22- into oil pressure tester.
–  Start engine.
l  Minimum oil pressure at idling speed: 1.2 bar.
l  Minimum oil pressure at 2000 rpm: 1.5 bar.
Assembling
–  Install oil pressure switch -F22- → Chapter.
  W00-0516

Oil retention valves, oil separator > < Removing and installing valve for oil pressure controlN428