Note t
| If the valve has to be renewed as part of a repair, use a new valve for the measurement. |
t
| Only insert inlet valve into inlet guide and exhaust valve into exhaust guide, as the stem diameters are different. |
–
| Insert valve into guide. |
l
| End of valve stem must be flush with valve guide. |
–
| Measure the amount of sideways play. |
–
| If the wear limit is exceeded, repeat the measurement with new valves. |
–
| Renew cylinder head if wear limit is still exceeded. |
Note Valve guides cannot be renewed. |
|
|
|