| Note the following if testers and measuring instruments have to be used during a road test: |
WARNING | Accidents can be caused if the driver is distracted by test equipment while road-testing, or if test equipment is not properly secured. |
| Persons sitting in the front passenger's seat could be injured if the airbag is triggered in an accident. |
| l
| The use of test equipment while driving causes distraction. |
| l
| There is an increased risk of injury if test equipment is not secured. |
| Test equipment must always be secured on the rear seat with a strap and operated from the rear seat by a second person. |
|
| To prevent injuries to persons and/or irreparable damage to the fuel injection and ignition system, the following must be noted: |
| t
| Do not touch or disconnect ignition wiring when the engine is running or being turned at starter speed. |
| t
| The ignition must be switched off before disconnecting or connecting ignition system wiring, high-voltage wires and test leads. |
| t
| If you want to crank the engine at starting speed without actually starting it (e.g. compression test), first unplug the connectors from the ignition coils and the injectors. |
| t
| Always switch off the ignition before cleaning the engine. |
|
|
|
