audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Direct petrol injection and ignition system (4-cyl. 1.8 ltr. 4-valve turbo with timing chain) > < Removing knock sensor 1G61

A4 Mk3

Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
   
t  Socket (4 mm) -T10370-
  W00-10582
t  Assembly tool -T10118-
Removing
–  Unplug electrical connector at engine speed sender -G28--2- using assembly tool -T10118-.
  Note
To release electrical connector without assembly tool -T10118-, press connector on engine speed sender in with a screwdriver and at the same time lift release tab with a thin wire hook.
  W00-1148
–  Unscrew securing bolt -1- using socket, AF 4 mm -T10370-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque: refer to overview of fitting locations → Chapter.
  A24-10612

Direct petrol injection and ignition system (4-cyl. 1.8 ltr. 4-valve turbo with timing chain) > < Removing knock sensor 1G61