–
| Press release tab and disconnect fuel line -1-. |
–
| Unplug electrical connector -6- for fuel gauge sender -G-. |
–
| Unplug electrical connector for fuel pump on fuel pump. |
–
| Lift flange -4- with fuel filter off fuel delivery unit -3-. |
–
| Release a total of 3 retaining tabs -5- by inserting a total of 3 release strips -7- (included in fuel filter repair kit) -arrow-. |
–
| Pull fuel filter -2- downwards out of flange. |
Installation is carried out in the reverse order; note the following: |
Note –
| Insert fuel filter into guides on flange and press in until it engages. |
Note The fuel filter can only be inserted in one position. |
–
| Install fuel delivery unit: vehicles with front-wheel drive → Anchor, vehicles with four-wheel drive → Anchor. |
|
|
|