audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking delivery pressure of power steering pump (vehicles with 6-cylinder diesel engine, vehicles with and without dynamic ste > < Exploded view (vehicles with 6-cylinder diesel engine, vehicles without dynamic steering)

A4 Mk3

Exploded view of pipes and hoses (vehicles with 6-cylinder diesel engine, vehicles with and without dynamic steering)
Exploded view of pipes and hoses (vehicles with 6-cylinder diesel engine, vehicles with and without dynamic steering)
   
Exploded view of mounting parts for pipes and hoses
1 - Bracket for reservoir to body → Fig.
2 - Reservoir in bracket → Fig.
3 - Bolt in bracket → Fig.
4 - Hydraulic fluid cooler to condenser → Fig.
5 - Power steering pump to bracket → Chapter „Removing and installing power steering pump (vehicles with 6-cylinder diesel engine, vehicles with dynamic steering)“ or → Chapter „Removing and installing power steering pump (vehicles with 6-cylinder diesel engine, vehicles without dynamic steering)“
6 - Pressure line to cross brace → Fig.
7 - Installation position of pressure line connection → Fig.
8 - Pressure line to engine mounting → Fig.
9 - Return line to subframe → Fig.
10 - Retainers securing return lines to subframe → Fig. and longitudinal member → Fig.
  A48-10423
Bracket for reservoir to body
–  Secure bracket -2- to body with bolts -1-.
–  Secure reservoir -4- in bracket -2- with bolt -3-.
  A48-10401
Reservoir in bracket
–  Fit reservoir (insert lug -1- into recess in bracket -2-).
  A48-10360
Retainers securing lines to longitudinal member
–  Secure return line -1- with pressure pipe -2- and nuts -3- to longitudinal member (left-side).
–  Secure return hose -5- to return line -1- with hose clip -4-. Note correct position -arrows- → Chapter.
  A48-10426
Hydraulic fluid cooler to condenser
–  Position hydraulic fluid cooler -1- on retainers -2- and then engage in retainers -3-.
Hoses to hydraulic fluid cooler → Chapter
  A48-10495
Pressure line to cross brace
–  Bolt pressure line with nut -3- and rubber mounting -4- onto cross brace.
–  Note correct position of line when connecting. Markings -1- and -2- must be aligned.
  A48-10429
Pressure line to engine mounting
–  Route pressure line -4- between connecting element -2- and engine mounting -3-.
–  Screw retainer -5- to stud -1- with nut -6-.
  A48-10444
Retainer for securing return line to subframe
–  Secure retainer -1- of return line to front left of subframe -2-.
  A48-10395
Pressure line and return line to subframe
–  Attach return line -4- with bracket -2- and bolt -1- to subframe -3-.
  A48-10428

Checking delivery pressure of power steering pump (vehicles with 6-cylinder diesel engine, vehicles with and without dynamic ste > < Exploded view (vehicles with 6-cylinder diesel engine, vehicles without dynamic steering)