audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting toe setting at front wheels > < Adjusting camber at rear wheels

A4 Mk3

Adjusting toe setting at rear wheels
Adjusting toe setting at rear wheels
Special tools and workshop equipment required
   
t  Socket -T40183-
t  Commercially available fine-tooth ratchet (not illustrated)
  W00-10678
–  Unscrew nut -A- at track rod/subframe, and screw on new nut as far as stop.
–  Adjust toe setting by turning eccentric bolt -B-.
Wheel alignment specifications → Chapter
–  Tighten nut -A- using socket -T40183- → Item.
–  Check toe setting again after tightening nut -A- → Chapter.
  Note
t  The maximum adjustment range is 90° to the left or right of the centre position.
t  Adjusting the individual toe settings automatically alters the geometric running direction of the axle.
  A44-10115

Adjusting toe setting at front wheels > < Adjusting camber at rear wheels