audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing internal battery for internet access control unitJ666 > < Connectors on internet access control unitJ666

A4 Mk3

Removing and installing internet access control unitJ666
Removing and installing internet access control unit -J666-
   
The internet access control unit -J666--1- is located in the glove box -2-.
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Open glove box.
–  Remove chip card.
  A91-11928
–  Slide internet access control unit -J666--1- towards rear in direction of -arrow- until it can be detached from lining -2-.
–  Release and unplug connectors -3- at chip card reader control unit -J676--1-.
Installing
–  Install in reverse sequence of removal.
–  Remove protective foil from internal battery.
If internet access control unit -J666- is renewed, the customer will need to re-configure it.
  A91-11928

Removing and installing internal battery for internet access control unitJ666 > < Connectors on internet access control unitJ666