| –
| Switch off ignition and take out ignition key. |
| –
| Turn light switch to position „0“. |
| –
| Detach cover -1- for dipped beam from headlight housing -arrow A-. |
| –
| Remove bulb -3- from spring clips -arrows B-. |
| –
| Unplug electrical connector -2- at bulb. |
| Installation is carried out in the reverse order; note the following: |
| –
| Insert new bulb in housing; do not touch glass part of bulb with bare hands. |
| –
| Push bulb beyond resistance of spring clips into housing. |
| –
| Plug in connector and close housing cover. |
|
|
|
