audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tail lights - Avant > < Exploded view of inner tail light cluster

A4 Mk3

Removing and installing inner tail light cluster
Removing and installing inner tail light cluster
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position „0“.
–  Lever off cover -1- with removal wedge -3409--arrow-.
  A94-10517
–  Unplug electrical connector -1-.
–  Unscrew nuts -arrows-.
–  Detach inner tail light from the outside.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Fig.
  Note
t  Complete inner tail light cluster must be renewed if LED is defective.
t  Ensure that seal between body and tail light housing seals completely.
  A94-11343

Tail lights - Avant > < Exploded view of inner tail light cluster