audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
LED tail lights from model year 2013 onwards - saloon > < Removing and installing rear fog light bulb L46/L47

A4 Mk3

Removing and installing reversing light bulb M16/M17
Removing and installing reversing light bulb -M16-/-M17-
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position „0“.
–  Lever off cover -1- with removal wedge -3409--arrow-.
  A94-10517
–  Remove nut -2- and detach retainer bracket (large) -1-.
–  Release bulb holder -3-: on left tail light by turning anti-clockwise -arrow-; on right tail light by turning clockwise.
–  Pull bulb holder out of tail light housing.
–  Pull reversing light bulb out of bulb holder.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass part of bulb with bare hands.
–  Fit retainer bracket (large) -1- onto stud on inner tail light and tighten nut -2-.
  Note
As the nut is tightened the retainer bracket becomes wedged in the rear lid.
  A94-10779

LED tail lights from model year 2013 onwards - saloon > < Removing and installing rear fog light bulb L46/L47