audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking carbon brushes - Valeo alternator from 2001 onwards > < Valeo alternator from 2001 onwards - exploded view

A4 Mk3

Removing and installing voltage regulator - Valeo alternator from 2001 onwards
Removing and installing voltage regulator - Valeo alternator from 2001 onwards
   
Removing
–  Remove alternator → Electrical system; Rep. gr.27.
–  Press cover on rear of alternator off studs -arrows-.
  A27-0208
–  Unscrew bolts -1- and centre hex stud -2-.
–  Remove voltage regulator.
  A27-0207
Installing
–  Press protective cap -2- off voltage regulator -1- in direction of -arrow-.
–  When positioning voltage regulator, ensure carbon brushes are positioned correctly on contact surfaces.
–  Refit protective cap when voltage regulator has been installed.
Further installation is carried out in the reverse order; note the following:
–  Install alternator → Electrical system; Rep. gr.27.
l  Tightening torque → Chapter
  A27-0209

Checking carbon brushes - Valeo alternator from 2001 onwards > < Valeo alternator from 2001 onwards - exploded view