audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Notes for service > < General notes and components used
Description
Description
The function starts when the conditions are met and the vehicle is unlocked. The vehicle can be unlocked as follows:
t  By remote control or
t  By operating a door handle (e.g.: contact sensor for front left exterior door handle -G605-) on vehicles with KESSY locking and starting system
   
Also, the rain and light sensor must be signalling »darkness« to the onboard supply control unit -J519-.
The status of the unlocked vehicle is placed on the data bus by the convenience system central control unit -J393-. If the other conditions are also met, the function is activated. The fog lights are then switched on by the onboard supply control unit -J519-, and the rear lights and number plate light are switched on by the convenience system central control unit -J393-. The function terminates when the ignition is switched on or at the latest one minute after the lights have been activated.
  A01-10053

Notes for service > < General notes and components used