A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
‹› - e - = 152 mm.
Dimensional data for All Wheel Drive (AWD) vehicles
‹› Outer edges of rear lid and lines extending from lower rear lights are used as reference edges.
1
Name plate
‹› Installation:
-
Warm vehicle and type designation to room temperature.
-
Bonding surfaces must be dry and free from dust and grease.
-
Clean outer panel with mineral spirits, treat with silicone remover and rub dry.
-
Pull off backing paper and press on characters, maintaining pressure for approx. 3 seconds.
‹› - a -= 30 mm.
‹› - b - = 28 mm.
‹› - c - = 4 mm.
‹› - d - = 36 mm.
‹› - e - = 13 mm.
‹› - f - = 53 mm.