A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Remove the floor covers.
-
Remove the left floor trim approximately (8 bolts).
-
Remove the inner floor trim at exhaust pipe
-
Detach the rear exhaust pipe.
-
Remove the heat shield at the rear of the fuel tank.
-
Detach the rear tunnel heat shield.
-
Disconnect the parking brake contact switch.
-
Remove the bolts - 3 and 4 -.
-
Remove the parking brake lever downward.
-
Remove the collar nuts - 1 -. (Nut tightening specification: 25 Nm).