A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-716003.png)
-
Disconnect the EVAP line to the turbocharger from the cylinder head cover - 2 -.
-
Loosen cylinder head cover from outside toward the inside.
-
Remove cylinder head cover.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace cylinder head cover gaskets if damaged.
-
Tightening sequence => [ Cylinder head cover tightening sequence ] See: Service and Repair/Cylinder Head Assembly Overview
-
Observe the correct positioning of the upper toothed belt cover.
Tightening Specifications
