A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Intake Manifold: Service and Repair
Intake Manifold Assembly Overview
Intake Manifold Assembly Overview
1 - Intake Air Temperature (IAT) Sensor 2 (G299) bolt
‹› 5 Nm
2 - Intake Air Temperature (IAT) Sensor 2 (G299)
3 - Intake manifold
‹› Removing and installing, refer to => [ Intake Manifold with Fuel Rail ] See: Intake Manifold With Fuel Rail
‹› The intake manifold runner position sensor (G336 ) item 10 must be adapted to the engine control module (J623) after removing or replacing
the intake manifold vehicle diagnosis, testing and information system (VAS 5052 ) "Guided Function".
4 - Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
5 - Bolt for single-piston high-pressure pump
‹› 3 pieces
‹› 10 Nm
6 - Fuel Pressure Regulator Valve (N276)
7 - Mechanical single-piston high-pressure pump