A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Timing Belt: Testing and Inspection
Toothed Belt Component Overview
Before removing ribbed belt, mark running direction with chalk or felt tip marker. A reversed turning direction can cause damage to belt under
operating conditions.
1
10 Nm
2
Toothed belt cover, upper
3
50 Nm plus an additional 180° (1/2 turn)
‹› Use Retainer (3036) for loosening and tightening => [ Loosening camshaft sprocket ]
4
Camshaft sprocket
‹› When removing and installing, remove toothed belt, refer to => [ Toothed Belt ] See: Service and Repair
‹› Installed position is fixed by woodruff key => [ (Item 7) Woodruff key ]
‹› Camshaft sprocket, removing => [ Pulling off camshaft sprocket ]
5
10 Nm
‹› Insert with locking fluid
6
Rear toothed belt cover
7
Woodruff key