A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
-
Engage side curtain airbag by threaded pins - 2 - and tighten the nut by hand.
-
Clip in bracket - 3 - and remaining brackets.
-
Tighten bolt - 1 - on bracket - 5 -. Refer to => [ (Item 1) Bolt (Qty. 10) ].
-
Tighten remaining bolts - 1 -. Refer to => [ (Item 1) Bolt (Qty. 10) ].
-
Tighten bolt - 4 -. Refer to => [ (Item 4) Bolt (Qty. 1) ].
-
Tighten nut 2. Refer to => [ (Item 2) Cap Nut ].
Installation is reverse of removal, noting the following:
-
Switch on ignition.
CAUTION!
No one should be in vehicle when connecting battery.
-
Connect the battery ground (GND) strap.
‹› Follow safety measures after connecting battery.
‹› If the Airbag Malfunction Indicator Lamp (MIL) ( K75) shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System ( VAS 5051 A), cleared and then rechecked.
Side Curtain Airbag, Avant
Special tools, testers and auxiliary items required