A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Trunk / Liftgate Switch: Service and Repair
Trunk Lid Contact Switch
Switches
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
Trunk Lid Contact Switch
Removing
-
Remove trunk lid lock.
-
Pry off plastic catch - 3 - from retaining bolts - 1 - using a flat screwdriver.
-
Bend plastic tab fully to rear.
-
Pull contact switch - 2 - first to the side and then upward out of trunk lid lock.
Installing
Installation is reverse of removal, paying attention to the following:
‹› Make sure that the washers between plastic catches and trunk lid lock have proper seating.