A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Replacing rain sensor
‹› To remove sensor, proceed as described above.
-
If necessary, completely remove foil remnants from windshield.
-
Clean sensor contact surface on windshield with cleaning solution D 009 401 04.
-
Peel off protective foil from rain sensor.
-
Spray entire surface of sensor foil with cleaning solution D 009 401 04 and insert sensor in mirror base.
-
Press sensor onto windshield without bubbles and place retaining clamps on mirror base.
CAUTION!
Rain sensor must be free of inclusions and bubbles on the windshield to function properly.