A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Alignment: Service and Repair
Front Axle Camber, Checking and Adjusting
Front Axle Camber, Checking and Adjusting
Camber cannot be adjusted.
By moving subframe, it is possible to center camber evenly within the specified/tolerance range.
-
Remove noise insulation.
Convertible only
-
Remove front diagonal brace. Refer to => [ Front or Rear Diagonal Braces ] See: Body and Frame/Frame/Structural Brace/Service and
Repair/Rear Suspension.
Continuation for all vehicles
-
Loosen hex bolts - 1 -, - 2 -, - 3 -, - 4 -, - 5 -, - 6 -, - 7 - and - 8 -.
-
Using a plastic-coated tire iron, slide subframe in corresponding location.