A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
/Page-675005.png)
-
Remove bolts -1- through -4- and remove crossmember.
NOTE: Flex joint in front exhaust pipe must not be bent more than 10 degrees, otherwise it may be damaged.
-
Disconnect exhaust system at both double clamps (arrows).
-
Remove VAG1359/2 universal mount from VAG1383A engine/transmission jack and insert a piece of wood -1- instead.
-
Support rear crossmember using VAG1383A engine/transmission jack.
-
Remove bolts -1- and -2-, then bolts -3- and -4-.
-
Slowly release rear crossmember using VAG1383A engine/transmission jack.
-
Set aside VAG1383A engine/transmission jack.
