A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
/Page-679003.png)
-
Remove bolts or release quick-release screws -1- and -2- and remove front sound insulation.
-
Release quick-release screws -3- and remove rear sound insulation, if present.
-
Remove bolts -1- through -4- and remove crossmember.
NOTE: Flex joint in front exhaust pipe must not be bent more than 10 degrees, otherwise it may be damaged.
-
Disconnect exhaust system at left double clamp (left arrow).
-
Remove heat shield -1- for left drive axle.
