A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
-
Remove bolt (arrow) and disconnect air guide -2- at throttle valve control module.
-
Disconnect hose -1- from air guide.
NOTE: The illustration shows the air guide from the rear with the engine removed.
-
Unscrew bolts -1- and -2- and remove combination valve.
-
Disconnect vacuum hose (arrow).
Installing
Installation is reverse of removal, noting the following:
NOTE: Replace gaskets and O-rings.
Tightening torques
Component
Nm
Combination valve to cylinder head
10
Connecting tube to combination valve
10