A4 Quattro Cabriolet V6-3.0L (BGN) (2005)
-
Unscrew oxygen sensor behind catalytic converter (arrow) using special tool 3337/7.
NOTE: Illustration is shown with engine removed.
-
Remove nut -2- for exhaust pipe/exhaust manifold which is accessible from top.
NOTE: Illustration is shown with engine removed.
-
Remove left front wheel.
-
For vehicles with auxiliary heater, remove bolts (arrows) for exhaust pipe of auxiliary heater on sound insulation.
-
Remove bolts or release quick-release screws -1- and -2- and remove front sound insulation.
-
Remove quick-release screws -3- and remove rear sound insulation, if present.