A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Front Door Panel: Service and Repair
Door Trim, Assembly Overview
Door Trim, Assembly Overview
1
-
Door trim
-
Removing
-
Remove triangular treble speaker trim.
-
Remove trim panel - 6 -.
-
Remove bolts - 5 - (2x).
-
Using a screwdriver, pry out switch panel of window regulator - 3 - from below through hole.
-
Remove bolt - 4 -.
-
Remove bolt - 7 -.
-
Unclip door trim - 1 - starting at bottom.
-
Detach door trim - 1 - upward.
-
Disconnect connector to window regulator control unit.
-
Disengage Bowden cable for interior door handle.
-
Installing
-
Make sure expanding nut - 10 - is clipped into door shell - 9 -.
-
Make sure all clips - 8 - (8x) are in position on inside of door trim Replace damaged clips - 8 -.
-
Make sure all clips - 2 - (6x) are clipped in on inside of door trim - 1 -.
-
Install door trim - 1 - in reverse order of removal.
2
-
Clips (6x)
3
-
Window regulator switch panel
4
-
Bolt
5
-
Bolts (2x)
6
-
Trim strip
7
-
Bolt
8
-
Clips (8x)
9
-
Door shell
10
-
Expanding nut