A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Rear Door Window Regulator: Service and Repair
Window Frame and Regulator
Window Frame and Regulator
1 - Window frame
‹› Removing:
‹› Remove door trim.
‹› Remove window regulator motor => [ Window regulator motor, removing and installing ] or manual window regulator => [ Manual window
regulators, removing and installing ].
‹› Disconnect electrical harness connectors.
‹› Remove bolts - 7 - and - 8 -.
‹› Remove bolts - 3 - - 4 -;- 6 - and - 10 - and lift window frame with window regulator upward and out of door.
‹› Installation:
‹› Insert window frame and window regulator into door from above.
‹› Knock in the upper profile halves of door-side gasket into window frame at top.
‹› Loosely screw in mounting bolts - 4 - at front and rear.
‹› Then, loosely screw in bolts in the sequence - 3 -;- 10 -; - 8 -.