A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Hood Latch Release Cable: Service and Repair
Hood Cable, Removing and Installing
Hood cable, removing and installing
1
-
Hood cable
-
Removing:
-
Remove front wheelhousing liner.
-
Remove storage compartment on drivers side (vehicles with knee bolster): or Vehicles without knee bolster:
-
Remove bolt.
-
Remove retaining clip.
-
Unclip cable for lower part of hood lock and disengage attachment lug-arrow A -.
-
Remove cable from retaining clips opened earlier and pull into wheelhousing toward lock carrier.
-
Install in reverse sequence.
-
Bring ball on cable for lower part of hood lock into installation position.
2
-
Operating lever
3
-
Screw
-
2.4 Nm
4
-
Retaining clamp
5
-
Lower part of hood lock
-
Removing and installing.
-
Can be used to adjust height of hood.
6
-
Retaining clip.