A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Trunk / Liftgate Shock / Support: Procedures
Gas-filled strut, venting
CAUTION: Clamp only within this area, otherwise accident could occur.
-
Clamp gas-filled strut in vice area - x - = 50 mm (2 in.).
-
Cover area of sawn portion with a rag to absorb oil spraying out.
CAUTION: Always wear eye protection when performing this procedure.
-
Cut through cylinder of gas strut within first third of cylinder's overall length using piston rod end of cylinder as reference point.