audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Trunk / Liftgate Stop|Adjustments|Page 11683 > < Gas-Filled Strut, Removing and Installing|Page 11679
Page 1
background image

Trunk / Liftgate Stop: Adjustments

Stop buffer, adjusting

-

Open rear lid.

-

Remove rubber cap.

-

Screw in buffer stops until they reach stop.

-

Unscrew stop again in steps.

-

Press rubber cap on.

-

When adjusted correctly and with lid closed, buffer stops must make contact lightly on luggage compartment edge.

Trunk / Liftgate Stop|Adjustments|Page 11683 > < Gas-Filled Strut, Removing and Installing|Page 11679