A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Convertible Top Deck Lid: Service and Repair
Left and Right Convertible Top Compartment Cover Locks, Removing and Installing
Left and right convertible top compartment cover locks, removing and installing
Removing
-
Remove rear seat bench and backrest.
CAUTION: Observe safety precautions when handling pyrotechnic belt tensioners.
-
Remove respective rear belt retractor.
-
Disconnect electrical connector behind belt retractor.
-
Bring convertible top into center position.
-
Remove securing clips for front convertible top compartment well trim until compartment locks are accessible.
-
Remove locking washer - 1 -.
-
Remove push rod - 2 -.
-
Mark exact position of bolts - 3 - and remove.
-
Remove convertible top compartment cover lock and lay it sideways,
-
Disconnect switch unit electrical connector and remove switch and lock.
NOTE: The connection is located behind the belt retractor.
Installing
Installation is reverse of removal, noting the following:
-
Install bolts exactly at the markings made earlier. In this way, it is not necessary to adjust the locks.
-
Ensure the convertible top compartment cover aligns with the side panel when closed.
-
Check whether switch works with convertible top compartment cover closed.