A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Power Mirror Switch: Service and Repair
Door Lamps and Switches
Mirror Adjustment Switch
Removing
-
Remove the driver door trim.
-
Remove the screws - arrows - on the pull handle for closing on back side of door trim.
-
Remove panel for pull handle for closing on front side, under mirror adjustment switch.
-
Disconnect electrical harness connector - 1 - at mirror adjustment switch - 2 -.
-
Carefully release catches - arrows - using a small screwdriver.
-
Pull out mirror adjustment switch downward from pull handle for closing.
Installing
Install in reverse order of removal, observing the following:
‹› When installing, make sure that symbol panel is inserted in front of mirror adjustment switch.
-
Press mirror adjustment switch into switch mount until catches engage.
-
Install the driver door trim.