A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-2213002.png)
Installing
-
The surface of the piston and seal should be cleaned using only methylated spirits and then dried.
-
Apply a thin coat of lithium grease (G 052 150 A2) to the piston and seal before inserting.
-
Place a protective seal with outer sealing lip on piston.
-
Using trim removal wedge (3409), insert inner sealing lip into the cylinder groove.
‹› When doing this hold the piston in front of the caliper housing.
-
Press the piston into the brake caliper housing using piston resetting tool (T10145).