A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-2231004.png)
-
Lay out sufficient lint free cloths in the area of the hydraulic control unit.
-
Disconnect the brake lines - 1 - and - 2 - and remove together with the rubber grommet.
-
Remove the brake booster bolts - 1 - ( (T45 ) Torx).
-
Remove the brake booster with brake master cylinder.
On vehicles installed with a cross brace the cross brace must be removed.
-
Removing and installing cross brace. Refer to => Steering and Suspension See: Steering and Suspension