A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Brake Pressure Sensor 1
‹› Protect the engine compartment against leaking brake fluid.
-
Loosen the bolt - 1 - and pull the coolant expansion tank out in the direction of the - arrow -, then swivel the tank to one side. Tightening
specification of bolts 6 Nm.
-
Disconnect the electrical connector - 1 -.
-
Remove the brake pressure sensor - 4 -.