A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-1037002.png)
-
Remove front bumper cover.
-
Bring lock carrier into service position. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
-
Remove oil cooler. Refer to => [ Oil Cooler ] See: Engine/Engine Lubrication/Oil Cooler/Service and Repair/Oil Cooler.
‹› Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the belt
under operating conditions.
-
Pivot tensioning device in direction of - arrow - to relieve tension on ribbed belt.
-
Remove ribbed belt from coolant pump.
-
Release tensioner unit
-
Separate connector - 1 - for wiring to air conditioning compressor clutch solenoid.