A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
![background image](/audi/a4_quattro_cabriolet/v6-3.2l_(bkh)/Page-875005.png)
-
Replace guide frame bolts - 1 through 16 -.
-
Insert long bolts in the inner row of the guide frame.
-
Tighten bolts - 1 through 31 - in 3 stages as follows:
-
Tighten bolts to 50 Nm in sequence - 1 to 16 -.
-
Tighten bolts an additional 90° in sequence - 1 to 16 -.
-
Tighten bolts for guide frame sealing surfaces on the cylinder block to 23 Nm in sequence - 17 to 31 -.
Allocation of crankshaft bearing shells for cylinder block