A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Mark connecting rod
Note:
^
Only replace connecting rod as a set.
^
Do not interchange connecting rod bearings.
-
Before removing, mark allocation of connecting rod and connecting rod bearing caps to each other and to cylinder with paint - arrow -.
Connecting rod, installed location
^
The molded tabs - arrows - at beveled surfaces of connecting rod pairs 1 and 2, 3 and 4, and 5 and 6 must point toward each other.
Oil spray jet for piston cooling
1. Insert bolt (9 Nm) using locking compound.
2. Oil spray jet with spray nozzle valve.