A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Drive Belt: Service and Repair
Ribbed Belt Drive Component Overview
Ribbed Belt Drive Component Overview
1
Ribbed belt
‹› Check for wear
‹› Before removing, mark direction of rotation using chalk or felt-tip marker. Reversing direction of rotation of a run-in belt can destroy the belt
‹› Removing and installing, refer to => [ Ribbed Belt ] See: Ribbed Belt
‹› When installing, make sure it is seated correctly on the pulleys
2
20 Nm plus an additional 90° (1/4 turn)
‹› Replace
3
22 Nm
4
Generator
‹› Removing and installing, refer to => Starting and Charging See: Starting and Charging
5
Cap for idler pulley
6
Idler roller for ribbed belt
‹› Tighten to 40 Nm