A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
‹› To improve clarity, the removed engine is shown from the rear.
-
Remove bolts - arrows - and remove upper section of intake manifold.
‹› Plug the intake ports of the cylinder head with clean rags.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace gaskets and O-rings.
‹› During installation, all cable ties must be reinstalled at the same location.
‹› Secure all hose connections using hose clamps appropriate for the model type.
Tightening Specifications