A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
If Valve Seal Removal Tool (3364) cannot be used, on several valve stem seals due to restricted clearance, proceed as follows:
-
Using a drift, drive out roll pin - arrow - at Valve Seal Removal Tool (3364) and remove impact puller attachment.
-
Place lower part of the Valve Seal Removal Tool ( 3364) on valve stem seal.
-
Secure Valve Seal Removal Tool (3364) with a drift or cotter pin driver - 1 -, as shown in the illustration.
-
Place valve lever on Valve Seal Removal Tool ( 3364) and pull off valve stem seal - arrow -.
‹› A plastic sleeve - A - is supplied with the new valve shaft seals.